Skip to content
NV Lic. #81535 · License limit $3,250,000 per project702.850.2488

Crash-Rated & Standard Bollards in Las Vegas

Bollards and vehicle barriers control where vehicles can go: protecting entrances, storefronts, equipment and pedestrian areas. We install fixed, removable and covered steel pipe bollards and the barrier arms a project specifies. Crash-rated systems are explained on crash-rated vehicle barriers.

Get a quote

Step 1 of 2

Takes about a minute. Nothing is sent until you press “Get my quote”.

What do you need?

Start typing — pick a suggestion or keep what you typed.

Scope

What we provide

  • Fixed steel pipe bollards, concrete-filled
  • Removable and lockable bollards for service access
  • Bollard covers and finishes
  • Barrier arms as specified
  • We price specified crash-rated fixed bollards to the project documents.
  • We price specified crash-rated removable and retractable bollards to the project documents.

Fixed and removable bollards

Fixed bollards are typically steel pipe set in concrete footings and filled with concrete. Removable and lockable bollards allow occasional access for service or emergency vehicles. Spacing, height, embedment and footing size follow the approved drawings.

  • Equipment, utility and building-corner protection
  • Storefront and entrance protection
  • Drive-lane and pedestrian separation

Vehicle barriers

Where a project calls for more than bollards, barrier arms and other vehicle barrier systems control traffic at entries and secured areas, often tied into gate operators and access control.

Crash-rated barriers are rated by their manufacturer, not by the installer: the rating belongs to the tested system and its foundation.

We price specified wedge barriers and crash beams to the project documents.

Crash-rated vs. non-rated bollards

A standard steel pipe bollard, set in a concrete footing and filled with concrete, protects buildings, equipment and walkways from low-speed impacts. It is not crash-rated: it has no tested rating, and its performance depends on the footing and soil.

A crash-rated bollard is a manufacturer’s system tested to ASTM F2656 (for example M30-P1 or M50-P1; the legacy DOS equivalents are K4 = M30-P1 and K12 = M50-P1). The rating holds only with the tested foundation, spacing and reinforcement, as shown in the certified test report and the approved submittal.

K-ratings correspond only to P1 (≤1 m penetration). An M-rating with P2–P4 is not equivalent to a K-rating.

Low-speed storefront protection bollards are often rated to ASTM F3016 (low-speed surrogate testing), which is different from an ASTM F2656 anti-ram rating.

  • Non-rated: storefront, dock, equipment and pedestrian protection where the documents do not cite a crash standard.
  • Crash-rated: anti-ram standoff where the security design requires a vehicle to be stopped at a defined speed and weight.
Crash ratings explained

Coordination

Bollard and barrier locations interact with underground utilities, accessible routes, fire access and drainage. We coordinate locations, utility locates and any required inspections with the general contractor or owner before excavation.

Perimeter security design

FAQ

Common questions

What should the documents include for crash-rated bollards?

The required rating (for example M30-P1), the specified manufacturer and model or an approved equal, the manufacturer’s foundation details confirmed by the engineer of record, and the certified test report in the submittal. Utility locates come before any excavation.

Can bollards be removable for deliveries?

Yes. Removable and lockable bollards are common where occasional vehicle access is needed.

Ready to start?

Get a quote for your site.

Tell us what you need and where. We will follow up to scope the work.