Skip to content
NV Lic. #81535 · License limit $3,250,000 per project702.850.2488
Automated slide gate at a commercial facility entrance

Gates & access

Automated Gate Installation & Access Control in Las Vegas

Vehicle and pedestrian entries that work every day: slide, cantilever and swing gates, operators, access control and pipe gates, delivered as one scope with the fence line.

Get a quote

Step 1 of 2

Takes about a minute. Nothing is sent until you press “Get my quote”.

What do you need?

Start typing — pick a suggestion or keep what you typed.

Scope

What we provide

  • Slide, cantilever and swing gates
  • Gate operators for commercial and industrial duty
  • Keypads, card readers, remotes and intercom entry (furnished and coordinated)
  • Pipe gates for open-land and utility sites
  • Entrapment-protection devices and safety signage

Project photos

Recent work

View the photo gallery

Gate types

Gate selection depends on the opening width, the space available beside and in front of the gate, grade, traffic volume and the security level required.

  • Slide gates (V-track): run on a ground track; suited to flat, paved openings.
  • Cantilever gates: carried on rollers off the ground; suited to openings where a track is impractical, such as uneven grade or debris.
  • Swing gates: single or double leaf; need clear space for the swing path.
  • Pedestrian gates: separate from vehicle gates, with access hardware to match.
Automated steel gate with louvered panels at a commercial building entrance

Pipe gates

Pipe gates are a rugged, simple choice for ranch-style, utility, mining and open-land entries. They can be built as swing, sliding or cantilever gates and, where power and the use case allow, fitted with an operator and access control.

Pipe gates

Gate operators

Operators are matched to the gate type, weight and length, the duty cycle and the power available (including solar where appropriate). Commercial and industrial entries typically need heavier-duty operators than residential sites.

  • Slide, swing and barrier-arm operators
  • Solar and battery-backup options
  • Loop detectors and vehicle-sensing for exit and safety
  • Manual release for power outages
Automated ornamental steel gate with a solar panel at a property entrance

Access control

Access control determines who can open the gate and how: keypads, proximity card readers, remotes, telephone or video intercom, and free-exit devices. We furnish and coordinate access-control equipment and operator wiring; it is installed by a licensed low-voltage/electrical subcontractor. We install the gates and mount the operators, and coordinate with the owner’s security and IT teams where a system ties into a larger network.

  • Keypads and proximity card readers
  • Remote transmitters
  • Telephone and video intercom entry
  • Free-exit and emergency-vehicle access as required by the local fire authority

Gate safety: UL 325 and ASTM F2200

Automated gates move heavy loads, so two industry standards shape how they are built and operated. UL 325 is the safety standard for gate operators: it covers how the operator behaves and the entrapment protection it must use. ASTM F2200 is the standard specification for automated vehicular gate construction: it covers the gate itself.

In general terms, UL 325 classifies vehicular gate operators by type of use (from residential to restricted-access industrial sites) and requires entrapment protection, meaning the gate must stop and reverse when it meets an obstruction. Protection may be built into the operator (inherent sensing) or provided by external devices such as photoelectric sensors (photo eyes) and contact edges, and current editions require the operator to monitor those external devices.

ASTM F2200 addresses gate construction details that reduce hazards, such as limiting openings and protrusions that could catch a person, guarding rollers and other pinch points, and providing positive stops. Vehicular gates are not intended for pedestrian use, so a separate pedestrian gate is normally provided.

Which requirements apply depends on the specific operator, gate and site. Product compliance is established by the manufacturer’s listing and documentation; we install gates and mount operators according to the manufacturer’s instructions and the project documents, and access-control equipment and operator wiring are installed by a licensed low-voltage/electrical subcontractor.

  • Entrapment protection at every point where a person could be caught
  • Warning signage on both sides of the gate
  • Separate pedestrian access away from the vehicle gate path
  • Manual release, and its location, communicated to the owner

Gate automation certifications

The Fence University Gate Automation Class 3 certification seal — Las Vegas FenceThe Fence University Gate Automation Safety certification seal — Las Vegas Fence

Las Vegas Fence holds Gate Automation and Gate Automation Safety certifications through The Fence University, the training program of the Fence Workers Association. See Safety & Qualifications.

The Fence University is the training program of the Fence Workers Association, whose president leads Las Vegas Fence.

Maintenance

Automated gates need routine inspection to keep working safely. Owners should test the reversing function and safety devices regularly, keep the track and rollers clear, and have the system serviced by a qualified technician. Stop using a gate that does not reverse properly until it is repaired.

  • Test photo eyes and edges; clean sensor lenses
  • Check hinges, rollers, tracks and fasteners
  • Confirm signage is in place and readable
  • Keep service records

FAQ

Common questions

Slide or cantilever gate: which do I need?

Slide gates need a level, paved opening for the track. Cantilever gates ride off the ground and need room beside the opening for the counterbalance. Grade, debris and available space usually decide it.

Can a gate run on solar power?

For many lower-traffic entries, yes. Traffic volume, gate size and sun exposure determine whether solar is practical.

Ready to start?

Get a quote for your site.

Tell us what you need and where. We will follow up to scope the work.