Skip to content
NV Lic. #81535 · License limit $3,250,000 per project702.850.2488

Pipe Gates

Pipe gates are a rugged, simple choice for utility, mining, ranch-style and open-land entries. We build and install sliding, cantilever and swing pipe gates, manual or fitted with an operator. Access control and operator wiring are furnished and coordinated by us and installed by a licensed low-voltage/electrical subcontractor.

Get a quote

Step 1 of 2

Takes about a minute. Nothing is sent until you press “Get my quote”.

What do you need?

Start typing — pick a suggestion or keep what you typed.

Scope

What we provide

  • Sliding pipe gates
  • Cantilever pipe gates
  • Single and double swing pipe gates
  • Gate operators, including solar where practical
  • Access control (furnished and coordinated): keypads, card readers, remotes

Sliding, cantilever and swing

Swing pipe gates are simple and common on open-land entries with room for the swing path. Sliding and cantilever pipe gates suit wider openings, sloped approaches or sites where a swing path is impractical; cantilever gates ride off the ground and avoid a track that can fill with dirt or debris.

  • Opening width and grade decide the gate type
  • Heavy-duty hinges, rollers and latches
  • Chain-and-padlock or lock-box options for remote sites

Operators

Where power and the use case allow, pipe gates can be automated. The operator is matched to the gate type, weight and length and to the duty cycle. Solar operators are often practical at remote, lower-traffic entries.

Access control

Keypads, card readers, remotes and intercom entry control who can open the gate. We furnish and coordinate this equipment and the operator wiring, which are installed by a licensed low-voltage/electrical subcontractor. Emergency-vehicle access is provided where the local fire authority requires it.

Gate safety

Automated pipe gates are subject to the same safety considerations as any automated vehicular gate, including entrapment protection and warning signage. See the gate safety overview on our automated gates page.

Gate safety: UL 325 and ASTM F2200

FAQ

Common questions

Can an existing pipe gate be automated?

Sometimes. The gate must be sound, properly hung and suitable for the operator and safety devices. We assess it first.

Ready to start?

Get a quote for your site.

Tell us what you need and where. We will follow up to scope the work.